NTG-2
Dual Powered Directional Condenser Microphone
The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.

The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions

Included accessories: ZP1 (zip pouch), RM5 (stand mount) WSVM (windshield) Other Accessories Available Here


OUR PRICE £PHONE Inc VAT
All RØDE MICROPHONES HAVE A FULL 10 YEAR GUARANTEE

Operation power:
The NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery. The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
Operation output impedance:
The NTG-2 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-2¡¯s output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
Acoustic principle:
Line plus Gradient.
Directional pattern:
Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance:
250 Ù - phantom power, 350 Ù - battery power
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise:
18 dB SPL (per IEC651, IEC268-15)
Maximum spl:
131 dB (@ 1% THD into 1 kÙ)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651:
113 dB (per IEC651, IEC268-15)
Power supply voltage:
1.5 V Alkaline Battery or P48 Phantom
Current consumption:
2.0 mA
Battery life:
>400 hours with fresh alkaline battery.
Output connection:
3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
Weight with battery:
161 g approx. (5 oz.)