NTG-1
Directional Condenser Microphone

The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries.

The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.

The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional accessories are available for more demanding applications.

Included accessories: ZP1 (zip pouch), RM5 (stand mount) WSVM (windshield) Other Accessories Available Here

OUR PRICE £PHONE Inc VAT
All RØDE MICROPHONES HAVE A FULL 10 YEAR GUARANTEE

Features:
Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction. Low weight: 105 grams approx. (3 oz.). Low handling noise. Supplied with stand mount, zip pouch and windshield. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
Operation output impedance:
The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-1¡¯s output is balanced between pin 2 (hot), pin 3 (cold) and pin 1 is ground.
Acoustic principle:
Line plus Gradient.
Directional pattern:
Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance:
50 Ù
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise:
18 dB SPL (per IEC651, IEC268-15)
Maximum spl:
139 dB (@ 1% THD into 1 kÙ)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651:
121 dB (per IEC651, IEC268-15)
Power supply voltage:
P48 Phantom, 44 V to 52 V

Current consumption:
3.5 mA
Output connection:
3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight with battery:
105 g approx. (3.37 oz.)