|
|
JVC GY-HD251E
NAV Discount Price
£
All our stock is genuine product supplied by JVC Professional UK with a full UK warranty.
Unlike many others we dont just sell boxes ! we use this kit for our own production work
meaning you get quality advice and support from experienced operators.
Back to HD Home Page HERE
Top-of-the-range HD251, dual role studio & ENG / EFP camcorder with optional studio adapter, offering HD SDI / SDI and 26 pin multicore connectivity. Live uncompressed 1080i and live uncompressed 720p are menu selectable as the HD SDI output, which is also carrying embedded audio and timecode. The DC power requirement is 12V which can be supplied either via the built-in V-plate battery mount or via AC adapter and the 4 pin XLR connector.
Main Features:
- 720p/50 & 60, 25 & 30, and 24 recording
- 1080i/50 and 720p/50 live, uncompressed output
- HD SDI and SDI with embedded audio and TC
- 12V system with built-in V-mount plate
- 14 bit A/D
- Timecode in/out. Genlock in
Additional Features:
- Remote control via 6 pin DIN
- Studio adaptor KA-HD250 option with 26 pin and HD SDI outputs
- Dynamic shading compensation
- Special cinema and cinelike gammas
|
 |
| Image pickup device: |
1/3" inch interline-transfer CCDs |
| Optical system: |
Colour separation system: F1.4, 3-colour separation prism
ND filter: +1/4ND, +1/16ND |
| No of pixels: |
Total: Approx 1,110,000 pixels |
| Colour system: |
PAL (wide band R-Y, B-Y encoder)
Colour bars: SMPTE HDTV colour bars / EBU colour bars |
| Sync system: |
Internal sync (built-in SSG)
External sync: BB, VBS, signal or HD tri-sync signal |
| Sensitivity: |
F8, 2000 lx (typical) |
| Minimum required Illumination: |
6 lx with F1.4, at 18 dB |
| Lens mount: |
1/3" bayonet system |
| Gain: |
0, 3, 6, 9, 12, 15, 18 dB, ALC |
| Shutter speeds: |
Electronic Shutter:
Standard value: 50 Hz
Fixed values:
7.5 - 10,000 Hz, 11 steps (HDV HD60p / HDV HD30p)
6.25 - 10,000 Hz, 11 steps (HDV HD50p / HDV HD25p; DV 50i/25p mode)
6 - 10,000 Hz, 12 steps (HDV HD24p / DV 24p) |
| Variable scan: |
About 60 to 10,000 Hz (HDV HD60p / HDV HD30p) /
About 50 to 10,000 Hz (HDV HD50p / HDV HD25p; DV 50i/25p mode)
About 24 - 10,000 Hz (HDV HD24p; DV 24p) |
| Dynamic range: |
300% or more |
| RECORDING |
:- |
| Recording formats: |
720p/50 & 60, 25 & 30, and 24 recording |
| Recording devices: |
Built-in MiniDV recorder.
External optional Hard Disk Recorder DR-HD100E |
| VIDEO |
HDV
Video signal recording format: HDV1 format, 8-bit, 19.7 Mbps
Compression: MPEG-2 video (profile & level: MP@H-14)
Sampling frequencies:
720/60p: 74.25/1.001 MHz (4:2:0 component)
720/50p: 74.25 MHz (4:2:0 component)
1080/60i: 74.25/1.001 MHz (4:2:0 component, cross conversion only)
1080/50i: 74.25 MHz (4:2:0 component, cross conversion only)
DV
Video signal recording format: DV format, 8-bit, 25 Mbps
Compression: DV compression, 4:2:0 |
| AUDIO: |
HDV
Audio signal recording format: MPEG1 Audio Layer II
DV
Audio signal recording format: 16-bit (locked audio), 48 kHz PCM for 2 channels or 12-bit, 32 kHz PCM for 4 channels
Usable tape: Mini DV tape
Tape speed: 18.831 mm/sec.
Record/play time: 63 minutes (with an M-DV63PROHD tape) |
| CONNECTORS |
HD/SD SDI output: 0.8 V (p-p), 75 ohms, unbalanced (BNC)
HD SDI: SMPTE292M/299M standard (embedded audio)
SD SDI: SMPTE259M/272M standard (embedded audio)
Analogue composite output:
1.0 V (p-p), 75 ohms, unbalanced (RCA)
Analogue component output:
Y: 1.0 V (p-p), 75 ohms, unbalanced (BNC)
R-Y / B-Y: 0.7 V (p-p), 75 ohms, unbalanced (BNC)
Analogue composite input:
1.0 V (p-p), 75 ohms, unbalanced (BNC: switchable from Genlock input)
Genlock input:
1.0 V (p-p), 75 ohms, unbalanced (BNC) |
| Audio input: |
Mic: -60 dBs, 3 kohms, balanced (XLR), +48 V output for phantom power supply
Line: +4 dBs, 10 kohms, balanced (XLR) |
| Audio output: |
-8 dBs, low impedance, unbalanced (RCA) |
| Other: |
Earphone jack: -18 dBs to -60dBs, 8-ohm impedance (stereo mini-jack x 2)
Time code input: 0±6 dBs, high impedance, unbalanced (BNC: switchable from component output)
Time code output: 0±6 dBs, low impedance, unbalanced (BNC: switchable from component output)
IEEE1394 connector: 6-pin
Remote connector: DIN 6-pin |
| Power requirement: |
DC 12 V (10.5 - 17V) |
| Power consumption: |
Approx 20W (in record mode) |
| Operating Temperature: |
0°C to 40°C
Storage: -20°C to 60°C |
| Operating Humidity: |
30% to 80% RH
Storage: 85% RH or less |
| Dimensions (WxHxD): |
242mm (W) x 233mm (H) x 414mm (D) |
| Weight: |
Mass: 3.7 kg (including viewfinder, microphone and tape) |
| ACCESSORIES (Supplied) |
Viewfinder x 1
Lens (Th16x5.5BRM) x 1
Microphone x 1
SD memory card x 1 |
| ACCESSORIES (Optional) |
KA-HD250U Studio Adaptor
DM-3106 Astro 6" Viewfinder
V-R70P-HDA Marshall 7" Viewfinder
RM-P210E CCU 26pin
RM-LP55U Remote Control - handheld
RM-LP57U Remote Control - desktop
ACM-12 Mount converter, 1/3" to 1/2"
ACM-17 Mount converter, 1/3" to 2/3"
WCV-82SC Wide angle converter, 82mm
Th13X3.5BRMU Fujinon 13x w/angle, 3.8 - 49.4mm
HZ-CA13U - 16mm film lens adapter
DR-HD100E Hard disk recorder, 40GB and 80GB capacity
KA-V100U Tripod Wedge Adaptor only
M-DV63PROHD 63 min. miniDV tape
M-DV12CL miniDV cleaning tape | | |
|
